{"title":"Thermostats","description":"","products":[{"product_id":"et-100w-electronic-on-off-thermostat-pt2456","title":"Exo Terra 100w Electronic On\/Off Thermostat","description":"\u003cp\u003eThe Exo Terra Electronic On\/Off Thermostat (PT2456) is a 100w on\/off controller designed for reptile keepers who need reliable, accurate temperature management in their vivarium or terrarium. Compatible with heat mats, heat cables, and ceramic heaters, it suits both desert and tropical setups where consistent thermal conditions are essential.\u003c\/p\u003e\u003ch3\u003eWhy Temperature Control Matters\u003c\/h3\u003e\u003cp\u003eReptiles are ectotherms — they depend entirely on external heat sources to regulate their body temperature. Getting that temperature gradient right inside the terrarium is one of the most important factors in keeping reptiles successfully. Without proper control, overheating on hot summer days or undercooling on cold winter nights becomes a real risk to your animal's health.\u003c\/p\u003e\u003ch3\u003eElectronic Triac Switching\u003c\/h3\u003e\u003cp\u003eRather than relying on a mechanical switch, this thermostat uses an electronic Triac switch to maintain the set temperature with significantly higher accuracy than conventional on\/off thermostats. This virtually eliminates temperature swings inside the terrarium, keeping conditions stable and predictable around the chosen setpoint.\u003c\/p\u003e\u003ch3\u003ePractical Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRed LED indicator lights when the heating device is active and switches off once the target temperature is reached\u003c\/li\u003e\n\u003cli\u003eRecessed dial prevents accidental temperature adjustment during handling\u003c\/li\u003e\n\u003cli\u003eWaterproof remote sensor can be safely positioned in high-humidity terrariums and aquatic environments\u003c\/li\u003e\n\u003cli\u003eSimple setup — connect your heater, set the dial, place the sensor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting It Up Correctly\u003c\/h3\u003e\u003cp\u003eBefore use, research the Preferred Optimum Temperature Range (POTR) for your specific species. Setting the thermostat to the correct temperature allows your reptiles to thermoregulate naturally by moving between warmer and cooler zones within the terrarium. A well-placed sensor is key to getting accurate readings at the point that matters most.\u003c\/p\u003e\u003cp\u003eA straightforward, dependable thermostat from a brand reptile keepers know well — the Exo Terra PT2456 gives you precise on\/off control without unnecessary complexity.\u003c\/p\u003e","brand":"Peregrine","offers":[{"title":"Default Title","offer_id":54147067183441,"sku":"CHT400","price":21.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/0403\/8225\/files\/CHT400_1_625b67e9-81a7-45ca-b537-8128c71b780d.jpg?v=1782959111"},{"product_id":"et-thermostat-600w-with-day-night-timer-pt2454","title":"Exo Terra Thermostat 600w with Day\/Night Timer","description":"\u003cp\u003eThe Exo Terra Thermostat 600W with Day\/Night Timer gives reptile keepers precise, round-the-clock control over vivarium heating — with separate daytime and night-time temperature settings that replicate the natural thermal cycles your animals depend on. Whether you're keeping desert species that need a sharp overnight drop or tropical reptiles requiring a more modest dip, this thermostat manages both ends of the day automatically.\u003c\/p\u003e\u003ch3\u003eDay\/Night Temperature Control\u003c\/h3\u003e\u003cp\u003eDaytime and night-time target temperatures are programmed independently, so the thermostat handles the transition between the two without any manual intervention. This prevents both overheating during warm summer periods and undercooling on cold winter nights — two of the most common causes of stress and illness in captive reptiles.\u003c\/p\u003e\u003ch3\u003eDimming and Pulse Proportional Accuracy\u003c\/h3\u003e\u003cp\u003eRather than simply switching heating devices on and off, the thermostat uses Dimming and Pulse Proportional control to hold temperatures precisely at the set point. This approach minimises temperature swings inside the terrarium, providing a far more stable environment than conventional on\/off thermostats can achieve.\u003c\/p\u003e\u003ch3\u003eDisplay and Indicators\u003c\/h3\u003e\u003cp\u003eThe LCD screen displays heating mode, day or night mode, and both the actual and target temperatures at a glance. A red LED and heating symbol show when the connected device is actively drawing power; once the set temperature is reached, the LED switches to blue and the heating symbol clears — so you always know exactly what the thermostat is doing.\u003c\/p\u003e\u003ch3\u003eCompatibility and Connections\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCompatible with heat mats, heat cables, ceramic heaters, and incandescent heat bulbs\u003c\/li\u003e\n\u003cli\u003eControls heating devices up to 300W per socket\u003c\/li\u003e\n\u003cli\u003eTemperature range: 10°C to 60°C\u003c\/li\u003e\n\u003cli\u003eWaterproof remote temperature probe for accurate in-terrarium sensing\u003c\/li\u003e\n\u003cli\u003ePush button and dial input system reduces the risk of accidental setting changes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting Up Correctly\u003c\/h3\u003e\u003cp\u003ePlace the temperature probe at the level and location where your animal spends most of its time, and always cross-reference with a separate thermometer to verify conditions inside the vivarium. Set temperatures according to the preferred optimum temperature range (POTR) for your specific species, and ensure the enclosure still provides a thermal gradient so your reptile can thermoregulate naturally.\u003c\/p\u003e\u003cp\u003eFor keepers who want automated day\/night cycling without relying on separate timer units, the PT2454 brings that functionality and high-accuracy proportional control into a single, straightforward unit.\u003c\/p\u003e","brand":"Peregrine","offers":[{"title":"Default Title","offer_id":54147069411665,"sku":"CHT401","price":50.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/0403\/8225\/files\/CHT401_1_fa0bef84-b134-4151-ad3e-3615d8916c4b.jpg?v=1782959112"},{"product_id":"et-300w-electronic-on-off-thermostat-pt2457","title":"Exo Terra 300w Electronic On\/Off Thermostat","description":"\u003cp\u003eThe Exo Terra PT2457 is a 300w electronic on\/off thermostat designed for reptile vivariums and terrariums, giving keepers accurate, reliable temperature control for heat mats, heat cables, and ceramic heaters. Whether you're maintaining a desert basking zone or a humid tropical setup, this thermostat keeps conditions stable and consistent around the clock.\u003c\/p\u003e\u003ch3\u003eWhy Temperature Control Matters\u003c\/h3\u003e\u003cp\u003eReptiles are ectotherms — they depend entirely on external heat sources to regulate their body temperature. A well-managed temperature gradient inside the terrarium isn't optional; it's fundamental to your animal's digestion, immune function, and long-term health. This thermostat helps you replicate the kind of reliable thermal environment your reptile would experience in the wild, and guards against dangerous fluctuations during summer heatwaves or cold winter nights.\u003c\/p\u003e\u003ch3\u003eElectronic Triac Switching\u003c\/h3\u003e\u003cp\u003eUnlike conventional mechanical thermostats, the PT2457 uses an electronic Triac switch to maintain the set temperature with a high degree of accuracy, virtually eliminating the temperature swings that can stress reptiles or compromise a bioactive setup. The red LED indicator lights up when the heating device is active and cuts out once the target temperature is reached, giving you an at-a-glance confirmation of your system's status at all times.\u003c\/p\u003e\u003ch3\u003ePractical Design Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRecessed control dial reduces the risk of accidental temperature changes during handling\u003c\/li\u003e\n\u003cli\u003eWaterproof remote sensor suitable for high-humidity vivariums and aquatic environments\u003c\/li\u003e\n\u003cli\u003eCompatible with heat mats, heat cables, and ceramic heaters up to 300w\u003c\/li\u003e\n\u003cli\u003eSimple setup — connect your heater, set your temperature, position the sensor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting It Up Correctly\u003c\/h3\u003e\u003cp\u003eBefore use, research the Preferred Optimum Temperature Range (POTR) for your specific species. Place the remote sensor at the point in the terrarium where you want temperature to be most accurately maintained — typically within the warm zone or at substrate level, depending on your heating method. Getting sensor placement right is as important as the thermostat itself.\u003c\/p\u003e\u003cp\u003eThe Exo Terra PT2457 gives reptile keepers straightforward, dependable thermal management without unnecessary complexity — a solid foundation for any heating setup in a desert or tropical vivarium.\u003c\/p\u003e","brand":"Peregrine","offers":[{"title":"Default Title","offer_id":54147070591313,"sku":"CHT405","price":23.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/0403\/8225\/files\/CHT405_1_d3771766-46bd-4c2f-a403-e4889d8c1ff2.jpg?v=1782959114"},{"product_id":"et-thermostat-300w-dim-pulse-prop-pt2461","title":"Exo Terra Thermostat 300w Dimming\/Pulse Proportional","description":"\u003cp\u003eThe Exo Terra PT2461 is a 300W dimming and pulse proportional thermostat built for reptile keepers who need precise, stable temperature control in their vivarium or terrarium. Compatible with heat mats, heat cables, ceramic heaters, and incandescent heat bulbs, it suits both desert and tropical setups where maintaining consistent temperatures year-round matters.\u003c\/p\u003e\u003ch3\u003eHow It Controls Temperature\u003c\/h3\u003e\u003cp\u003eUnlike basic on\/off thermostats, this unit operates in dimming or pulse proportional mode, modulating power output to keep temperatures locked at the set point rather than cycling through swings above and below it. This significantly improves accuracy and reduces thermal stress on your animals. An on\/off mode is also available for simpler heating applications.\u003c\/p\u003e\u003ch3\u003eTemperature Range \u0026amp; Accuracy\u003c\/h3\u003e\u003cp\u003eThe thermostat operates across a range of 18°C to 38°C, covering the requirements of the vast majority of commonly kept reptile species. The dimming and pulse proportional function keeps the vivarium temperature far closer to the chosen set point than conventional switching thermostats, which is particularly important for heat-sensitive or desert-dwelling species.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControls heating devices up to 300W\u003c\/li\u003e\n\u003cli\u003eThree operating modes: Pulse Proportional, Dimming, and ON\/OFF\u003c\/li\u003e\n\u003cli\u003eTemperature range: 18°C to 38°C\u003c\/li\u003e\n\u003cli\u003eRed LED indicates heating device is active; blue LED indicates set temperature has been reached and power is cut\u003c\/li\u003e\n\u003cli\u003eRecessed dial prevents accidental adjustment during handling\u003c\/li\u003e\n\u003cli\u003eWaterproof remote temperature probe — safe for humid vivariums and aquatic environments\u003c\/li\u003e\n\u003cli\u003ePower cord with grounded plug and receptacle, allowing use with a power outlet strip\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting Up Correctly\u003c\/h3\u003e\u003cp\u003ePlace the waterproof probe at the point in the terrarium where you want to monitor temperature — typically within the warm zone. Research the preferred optimum temperature range for your specific species before setting the dial, and always verify temperatures independently using a calibrated thermometer. Correct probe placement is essential for accurate thermoregulation gradients.\u003c\/p\u003e\u003cp\u003eA reliable thermostat is one of the most important pieces of equipment in any reptile setup. The Exo Terra PT2461 gives keepers the precision and flexibility to maintain stable conditions without constant manual adjustment, letting your animals behave and thrive naturally.\u003c\/p\u003e","brand":"Peregrine","offers":[{"title":"Default Title","offer_id":54147085893969,"sku":"CHT411","price":33.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/0403\/8225\/files\/CHT411_1_718b8de3-070c-4560-9fc4-9f0a30f9bf28.jpg?v=1782959115"},{"product_id":"et-thermostat-600w-with-dual-recepticles-pt2463","title":"Exo Terra Thermostat 600w Dual Receptacles","description":"\u003cp\u003eThe Exo Terra PT2463 is a 600W dimming and pulse proportional thermostat with dual receptacles and a built-in day\/night timer — designed for reptile keepers who need precise, automated temperature management across a full 24-hour cycle. Whether you're running a desert or tropical vivarium setup, this thermostat gives you independent control over daytime and night-time temperatures from a single unit.\u003c\/p\u003e\u003ch3\u003eDay\/Night Dual Zone Control\u003c\/h3\u003e\u003cp\u003eEach receptacle operates independently: one powers your daytime heat source, the other handles night-time heating. This means you can run, for example, an incandescent basking bulb during the day and a heat mat after dark, with each device governed by its own target temperature. Genuine day-to-night temperature fluctuation — the kind that matters for reptile health and behaviour — is maintained automatically without manual intervention.\u003c\/p\u003e\u003ch3\u003eDimming and Pulse Proportional Accuracy\u003c\/h3\u003e\u003cp\u003eRather than cycling heating devices on and off in crude intervals, the PT2463 uses dimming and pulse proportional control to hold temperatures tightly at the set point. This significantly reduces temperature swings compared to conventional on\/off thermostats, giving your animals a more stable thermal environment throughout the day and night.\u003c\/p\u003e\u003ch3\u003eDisplay and Indicators\u003c\/h3\u003e\u003cp\u003eThe LCD screen shows both the actual and set temperature at a glance, alongside the current heating mode and whether the unit is in day or night operation. A red LED and on-screen heating symbol illuminate when a heating device is active; once the target temperature is reached, the LED switches to blue and the heating symbol clears — so you always know exactly what the thermostat is doing.\u003c\/p\u003e\u003ch3\u003eKey Specifications and Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTotal output: 600W across dual receptacles (300W per socket)\u003c\/li\u003e\n\u003cli\u003eTemperature range: 10°C to 60°C\u003c\/li\u003e\n\u003cli\u003eIndependent daytime and night-time temperature settings\u003c\/li\u003e\n\u003cli\u003eCompatible with heat mats, heat cables, ceramic heaters, and incandescent heat bulbs\u003c\/li\u003e\n\u003cli\u003eWaterproof remote temperature probe\u003c\/li\u003e\n\u003cli\u003ePush button and dial input system to prevent accidental adjustment\u003c\/li\u003e\n\u003cli\u003eLCD display showing actual temp, set temp, heating mode, and day\/night status\u003c\/li\u003e\n\u003cli\u003eRed\/blue LED heating indicator\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOverheating and Undercooling Protection\u003c\/h3\u003e\u003cp\u003eThe thermostat actively works to prevent temperature extremes during unusually hot summer days or cold winter nights — conditions that can push a vivarium well outside safe parameters if heating is left unmanaged. With the probe placed correctly, the PT2463 responds to ambient changes and adjusts output accordingly.\u003c\/p\u003e\u003cp\u003eFor keepers who want reliable, hands-off temperature automation across a full day\/night cycle without managing two separate controllers, the Exo Terra PT2463 consolidates that control into one well-specified unit.\u003c\/p\u003e","brand":"Peregrine","offers":[{"title":"Default Title","offer_id":54147092840785,"sku":"CHT415","price":70.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/0403\/8225\/files\/CHT415_1_f88a4b2b-968f-4f65-8f13-d9c93f2d20e0.jpg?v=1782959117"},{"product_id":"et-thermostat-600w-hydrostat-100w-pt2464","title":"Exo Terra Thermostat 600w \u0026 Hygrostat 100w","description":"\u003cp\u003eThe Exo Terra PT2464 combines a 600W dimming thermostat and a 100W hydrostat into a single unit, giving reptile keepers precise, simultaneous control over both temperature and humidity. Designed for desert and tropical vivarium setups alike, it replicates the natural variation between day and night conditions — independently adjustable for each cycle.\u003c\/p\u003e\u003ch3\u003eDay \u0026amp; Night Climate Control\u003c\/h3\u003e\u003cp\u003eTemperature and humidity settings are configured separately for daytime and night-time periods, allowing you to drop temperatures after dark or raise humidity overnight, just as conditions shift in the wild. This level of cycle-specific control is particularly valuable for species with pronounced diurnal rhythms. The unit actively protects against overheating in summer and undercooling in winter, while maintaining humidity at the set level throughout.\u003c\/p\u003e\u003ch3\u003eDimming Thermostat for Accurate Temperature\u003c\/h3\u003e\u003cp\u003eRather than switching heating devices on and off, the dimming function modulates power output to hold temperature precisely at the set point. This reduces temperature swings significantly compared to conventional on\/off thermostats, making it well suited for heat mats, heat cables, and ceramic heaters. The thermostat handles heating loads up to 600W, covering the majority of vivarium heating setups.\u003c\/p\u003e\u003ch3\u003eHydrostat Function\u003c\/h3\u003e\u003cp\u003eThe integrated 100W hydrostat controls foggers or humidifiers independently of the heating circuit. Humidity can be set up to 99% RH, and the blue LED indicator shows when the humidifying device is active — switching off once the target level is reached. The remote sensor is rated for use in high-humidity environments, making it suitable for tropical and rainforest terrariums.\u003c\/p\u003e\u003ch3\u003eDisplay, Controls \u0026amp; Safety\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLCD screen displays current temperature, humidity, and active mode (heating\/day\/night)\u003c\/li\u003e\n\u003cli\u003eRed LED indicates heating device is powered; extinguishes when set temperature is reached\u003c\/li\u003e\n\u003cli\u003eBlue LED indicates humidifying device is powered; extinguishes when set humidity is reached\u003c\/li\u003e\n\u003cli\u003eTemperature range: 10°C to 60°C; humidity range: up to 99% RH\u003c\/li\u003e\n\u003cli\u003ePush button and dial input system minimises accidental setting changes\u003c\/li\u003e\n\u003cli\u003eRemote combined temperature and humidity probe included\u003c\/li\u003e\n\u003cli\u003eGrounded plug and receptacle for safe use with a power outlet strip\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Heating \u0026amp; Humidifying Equipment\u003c\/h3\u003e\u003cp\u003eConnect any heat mat, heat cable, or ceramic heater to the thermostat output, and a fogger or humidifier to the hydrostat output. Place the remote sensor in the area of the vivarium where accurate readings matter most, set your day and night parameters, and the unit manages both systems from there.\u003c\/p\u003e\u003cp\u003eFor keepers who need reliable, species-appropriate climate management without running separate controllers, the PT2464 consolidates temperature and humidity regulation into one well-specified unit.\u003c\/p\u003e","brand":"Peregrine","offers":[{"title":"Default Title","offer_id":54147095036241,"sku":"CHT420","price":89.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/0403\/8225\/files\/CHT420_1_11c236a7-d888-4fca-949f-9104be355372.jpg?v=1782959119"},{"product_id":"lr-thermo-control-pro-ii-tc2-prouk","title":"Lucky Reptile Thermo Control PRO II","description":"\u003cp\u003eThe Lucky Reptile Thermo Control PRO II is a dual-circuit digital thermostat with a built-in real-time clock, designed for reptile keepers who need precise, automated day and night temperature management in a single unit. It handles both heating and cooling outputs, making it suitable for a wide range of vivarium and terrarium setups.\u003c\/p\u003e\u003ch3\u003eDay and Night Temperature Control\u003c\/h3\u003e\u003cp\u003eThe PRO II runs two independent temperature circuits, one for daytime and one for night-time. Switching between the two modes is handled automatically by the integrated real-time clock, removing the need for separate timers or manual adjustments to maintain your animal's natural thermal cycle.\u003c\/p\u003e\u003ch3\u003eTimer Functionality\u003c\/h3\u003e\u003cp\u003eThe built-in timer operates in one-minute increments, giving you finer scheduling control than many comparable units. Two separate ON\/OFF time periods can be programmed, functioning in the same way as a standard timer but integrated directly into the thermostat itself.\u003c\/p\u003e\u003ch3\u003eHeating and Cooling Modes\u003c\/h3\u003e\u003cp\u003eAs well as controlling heating elements, the Thermo Control PRO II can be switched into cooling mode, making it equally useful for running fans or other cooling devices. This flexibility means the unit can support both thermoregulation and ventilation management within the same vivarium.\u003c\/p\u003e\u003ch3\u003eKey Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaximum load: 1000W\u003c\/li\u003e\n\u003cli\u003eTemperature range: 0°C to 50°C\u003c\/li\u003e\n\u003cli\u003eTwo independent temperature circuits (day and night)\u003c\/li\u003e\n\u003cli\u003eReal-time clock with one-minute timer increments\u003c\/li\u003e\n\u003cli\u003eTwo programmable ON\/OFF time periods\u003c\/li\u003e\n\u003cli\u003eSwitchable heating and cooling modes\u003c\/li\u003e\n\u003cli\u003eUK plug configuration (TC2-PROUK)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Thermo Control PRO II gives keepers reliable, clock-driven temperature scheduling in one straightforward unit — reducing the number of devices needed in a setup while maintaining accurate environmental control for your animals.\u003c\/p\u003e","brand":"Peregrine","offers":[{"title":"Default Title","offer_id":54147103981905,"sku":"CLT010","price":59.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/0403\/8225\/files\/CLT010_1_e38a341d-eb94-4881-a910-06c74890141d.jpg?v=1782959140"},{"product_id":"microclimate-ministat-100","title":"Microclimate Ministat On-Off Thermostat 100w","description":"\u003cp\u003eThe Microclimate Ministat 100 is a straightforward on\/off thermostat designed for reptile keepers who need reliable temperature control without unnecessary complexity. It suits a wide range of vivarium heating setups and is built around ease of use from day one.\u003c\/p\u003e\u003ch3\u003eHow It Works\u003c\/h3\u003e\u003cp\u003eConnect your heat source to the thermostat's output socket, place the sensor probe at the correct position within the vivarium, and dial in your target temperature on the front-mounted control. That's the entire setup process — no menus, no programming, no guesswork.\u003c\/p\u003e\u003ch3\u003eTamper-Resistant Dial\u003c\/h3\u003e\u003cp\u003eThe Ministat 100 features a tamper-resistant temperature dial that resists accidental adjustment. This is a meaningful safety feature in households with children, where an unintended knock to a standard dial could alter vivarium temperatures with serious consequences for the animal inside.\u003c\/p\u003e\u003ch3\u003eDependable On\/Off Control\u003c\/h3\u003e\u003cp\u003eAs an on\/off thermostat, the Ministat 100 switches your heater fully on when the vivarium drops below the set temperature and cuts power once the target is reached. This straightforward switching action makes it a dependable choice for heat mats, heat cables, and similar low-wattage heating equipment commonly used in reptile and exotic pet keeping.\u003c\/p\u003e\u003cp\u003eThe Microclimate Ministat 100 is a no-fuss, trustworthy thermostat that keeps your vivarium at the right temperature — consistently and safely.\u003c\/p\u003e","brand":"Peregrine","offers":[{"title":"Default Title","offer_id":54147104702801,"sku":"CMA005","price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/0403\/8225\/files\/CMA005_1_dcd4150f-c23a-45d6-be8b-438db5731017.jpg?v=1782959146"},{"product_id":"microclimate-ministat-600","title":"Microclimate Ministat On-Off Thermostat 600w","description":"\u003cp\u003eThe Microclimate Ministat 600 is a reliable on\/off analogue thermostat designed for straightforward vivarium temperature control. Built for reptile keepers who want dependable heat regulation without unnecessary complexity, it handles the essentials with no fuss.\u003c\/p\u003e\u003ch3\u003eSimple to Set Up\u003c\/h3\u003e\u003cp\u003eGetting started takes minutes. Connect your heater to the thermostat's socket, place the probe sensor in the correct position within the vivarium, and dial in your target temperature on the front of the unit. There is nothing complicated to configure or calibrate.\u003c\/p\u003e\u003ch3\u003eTamper-Resistant Dial\u003c\/h3\u003e\u003cp\u003eThe Ministat 600 features a tamper-resistant temperature dial that cannot be accidentally knocked or shifted by a child. For households where unauthorised adjustments could have serious consequences for your animals, this is a meaningful and practical safeguard.\u003c\/p\u003e\u003ch3\u003eOn\/Off Control\u003c\/h3\u003e\u003cp\u003eThis thermostat operates on a straightforward on\/off switching cycle, cutting power to the heater when the set temperature is reached and restoring it when the temperature drops. It is a proven, dependable control method suited to a wide range of heating equipment used in reptile and exotic pet enclosures.\u003c\/p\u003e\u003cp\u003eThe Microclimate Ministat 600 gives keepers a no-nonsense, trustworthy foundation for vivarium heating — backed by one of the UK's most established names in reptile thermostat manufacture.\u003c\/p\u003e","brand":"Peregrine","offers":[{"title":"Default Title","offer_id":54147108340049,"sku":"CMA011","price":29.32,"currency_code":"GBP","in_stock":true}]},{"product_id":"microclimate-dimmer-b1-black-600w","title":"Microclimate Dimmer B1 Thermostat Black 600w","description":"\u003cp\u003eThe Microclimate Dimmer B1 Black is a 600W dimming thermostat designed for reptile keepers who need reliable, accurate temperature control in their vivarium. Rather than switching heat on and off, it gradually varies the power supplied to the heat source, delivering smooth, stable temperatures that better reflect natural conditions.\u003c\/p\u003e\u003ch3\u003eHow It Controls Temperature\u003c\/h3\u003e\u003cp\u003eUsing microprocessor-based dimming technology, the B1 continuously adjusts power output rather than cycling the heater on and off. This gradual approach reduces temperature fluctuation inside the vivarium and is gentler on heat sources over time.\u003c\/p\u003e\u003ch3\u003eDesigned to Prevent Accidental Changes\u003c\/h3\u003e\u003cp\u003eThe temperature control adjuster is recessed into the casing rather than protruding outward. This deliberate design choice means the dial is protected from accidental knocks — an important consideration when the thermostat is positioned in or around an active vivarium setup.\u003c\/p\u003e\u003ch3\u003eAt-a-Glance Power Feedback\u003c\/h3\u003e\u003cp\u003eA yellow LED indicator provides real-time visual feedback on how much power is currently being delivered to the heat source. At a glance, you can see whether the thermostat is working hard or barely running — useful for monitoring seasonal changes or identifying issues early.\u003c\/p\u003e\u003ch3\u003ePractical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaximum load: 600W\u003c\/li\u003e\n\u003cli\u003eSensor cable length: 2.5 metres\u003c\/li\u003e\n\u003cli\u003eCompatible with Microclimate's Mounting Bracket (sold separately)\u003c\/li\u003e\n\u003cli\u003eExternal fuse socket for quick, tool-free fuse replacement\u003c\/li\u003e\n\u003cli\u003eSpare fuses included\u003c\/li\u003e\n\u003cli\u003eLong cable lengths suit most vivarium configurations\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Microclimate Dimmer B1 Black is a straightforward, well-built dimming thermostat that covers the essentials without complication — giving keepers confidence that their heat source is being controlled accurately day and night.\u003c\/p\u003e","brand":"Peregrine","offers":[{"title":"Default Title","offer_id":54147109486929,"sku":"CMA060","price":48.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/0403\/8225\/files\/CMA060_1_eb74b936-8a39-489b-8dcd-77bdfe0a41d5.jpg?v=1782959148"},{"product_id":"microclimate-dimmer-b1-ht-black-600w-hitemp","title":"Microclimate Dimmer B1 High Temp Thermostat Black 600w","description":"\u003cp\u003eThe Microclimate Dimmer B1 HT Black 600W is a high-temperature dimming thermostat built for reptile keepers who need stable, precise heat control across demanding vivarium setups. Rated to 600W and designed for elevated temperature ranges, this is the HiTemp variant of Microclimate's trusted B1 dimmer — suited to setups where standard thermostats fall short.\u003c\/p\u003e\u003ch3\u003eHow It Controls Temperature\u003c\/h3\u003e\u003cp\u003eRather than switching power on and off abruptly, the B1 HT gradually varies the power delivered to your heat source. This dimming approach produces a smooth, consistent temperature inside the vivarium without the fluctuations associated with on\/off switching. Advanced microprocessor technology underpins the regulation, keeping the heat source responsive and stable.\u003c\/p\u003e\u003ch3\u003eTemperature Range\u003c\/h3\u003e\u003cthis elevated ceiling distinguishes the hitemp variant from standard b1.\u003e\u003ch3\u003eDesign Details Worth Noting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRecessed temperature control adjuster reduces the risk of accidental setting changes if the unit is knocked\u003c\/li\u003e\n\u003cli\u003eYellow LED provides live feedback on how much power is currently being supplied to the heater\u003c\/li\u003e\n\u003cli\u003eExternal fuse socket allows quick fuse replacement without dismantling the unit\u003c\/li\u003e\n\u003cli\u003eSpare fuses included in the box\u003c\/li\u003e\n\u003cli\u003e2.5m sensor cable supplied as standard for flexible probe placement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation and Compatibility\u003c\/h3\u003e\n\u003cp\u003eLong cable lengths mean the B1 HT fits into most vivarium configurations without awkward routing. The unit is compatible with Microclimate's dedicated mounting bracket, sold separately, for a clean and secure installation.\u003c\/p\u003e\n\u003cp\u003eFor keepers who need reliable dimming control at higher temperatures, the Microclimate Dimmer B1 HT Black 600W delivers the consistency and build quality that Microclimate thermostats are known for in the UK reptile hobby.\u003c\/p\u003e\u003c\/this\u003e","brand":"Peregrine","offers":[{"title":"Default Title","offer_id":54147113058641,"sku":"CMA062","price":48.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/0403\/8225\/files\/CMA062_1_b9e834c6-3d7d-4f34-b413-0f078b4fe2d2.jpg?v=1782959150"},{"product_id":"microclimate-pulse-b2-black-600w","title":"Microclimate Pulse B2 Thermostat Black 600w","description":"\u003cp\u003eThe Microclimate Pulse B2 Black 600W is a pulse proportional thermostat built for reptile keepers who need reliable, accurate temperature control over non-light-emitting heat sources in their vivarium. Using microprocessor-driven pulse technology, it delivers precise heat management without the instability of simple on\/off switching — making it a dependable choice for ceramic heaters, heat mats, and cable heaters up to 600W.\u003c\/p\u003e\u003ch3\u003eHow Pulse Proportional Control Works\u003c\/h3\u003e\u003cp\u003eRather than switching a heater fully on or off, a pulse thermostat modulates the power supplied to the heat source in rapid pulses. This maintains a far more stable temperature inside the vivarium than traditional on\/off thermostats. It is important to note that pulse thermostats are not compatible with light-emitting heat sources — the pulsed power delivery will cause bulbs to flash visibly, which is why the B2 should only be used with non-light-emitting heaters.\u003c\/p\u003e\u003ch3\u003eDesign Details\u003c\/h3\u003e\u003cp\u003eThe temperature control dial is recessed into the casing rather than protruding outward, reducing the risk of accidental adjustment if the unit is knocked. A yellow LED indicator provides real-time feedback on how much power is currently being delivered to the heater, giving you a clear at-a-glance read on thermostat activity. The external fuse socket allows quick and straightforward fuse replacement without tools.\u003c\/p\u003e\u003ch3\u003eTemperature Range and Sensor\u003c\/h3\u003e\u003cul\u003e\u0026lt;\u003cli\u003eSupplied with a 2.5m sensor cable for flexible probe placement within the vivarium\u003c\/li\u003e\n\u003cli\u003eCompatible with Microclimate's Mounting Bracket (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the Box\u003c\/h3\u003e\u003cp\u003eThe Microclimate Pulse B2 Black 600W comes complete with the thermostat unit, 2.5m sensor cable, and a set of spare fuses included as standard. Long cable lengths on the unit itself are designed to accommodate a wide range of vivarium setups without awkward routing.\u003c\/p\u003e\u003cp\u003eFor keepers running ceramic heat emitters or other non-light-emitting heat sources, the Microclimate Pulse B2 Black 600W offers a well-engineered, practical solution with the build quality and feature set that experienced reptile keepers expect from Microclimate.\u003c\/p\u003e","brand":"Peregrine","offers":[{"title":"Default Title","offer_id":54147113943377,"sku":"CMA070","price":41.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/0403\/8225\/files\/CMA070_1_65dff685-b404-4f78-a929-b69ae7b69d9d.jpg?v=1782959151"},{"product_id":"microclimate-pulse-b2-ht-black-600w-hitemp","title":"Microclimate Pulse B2 High Temp Thermostat Black 600w","description":"\u003cp\u003eThe Microclimate Pulse B2 HT is a pulse proportional thermostat designed for non-light-emitting heat sources up to 600W, with a high-temperature range built specifically for keepers working with species that require elevated basking conditions. Using microprocessor-controlled pulse technology, it delivers precise, stable heat regulation inside the vivarium — making it a reliable choice for ceramic heat emitters, heat mats, and similar heat-only equipment.\u003c\/p\u003e\u003ch3\u003eHow Pulse Proportional Control Works\u003c\/h3\u003e\u003cp\u003eRather than switching a heater fully on and off like a simple on\/off thermostat, a pulse proportional unit rapidly pulses power to the heat source, fine-tuning output to maintain the target temperature with accuracy. This method is not compatible with light-emitting heat sources — the rapid pulsing will cause bulbs to flash visibly — so this thermostat should only be paired with non-light-emitting heating equipment.\u003c\/p\u003e\u003ch3\u003eHigh Temperature Range\u003c\/h3\u003e\u003cthis covers the needs of many arid-environment and high-basking species kept in uk hobby.\u003e\u003ch3\u003eDesign and Controls\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRecessed temperature adjustment dial prevents accidental setting changes if the unit is knocked\u003c\/li\u003e\n\u003cli\u003eYellow LED gives real-time feedback on how much power is being delivered to the heater\u003c\/li\u003e\n\u003cli\u003eExternal fuse socket allows quick fuse replacement without opening the unit\u003c\/li\u003e\n\u003cli\u003eSpare fuses included as standard\u003c\/li\u003e\n\u003cli\u003e2.5m sensor cable provides flexibility when positioning the probe within the vivarium\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting and Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe Microclimate Pulse B2 HT is compatible with Microclimate's dedicated mounting bracket, sold separately, making permanent installation in a vivarium cabinet or rack straightforward. The long cable lengths are designed to accommodate most vivarium configurations without awkward routing.\u003c\/p\u003e\n\u003cp\u003eA well-specified thermostat is one of the most important components in any reptile setup. The Microclimate Pulse B2 HT gives keepers accurate, high-range temperature control with practical features that make day-to-day use straightforward.\u003c\/p\u003e\u003c\/this\u003e","brand":"Peregrine","offers":[{"title":"Default Title","offer_id":54147120234833,"sku":"CMA072","price":42.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/0403\/8225\/files\/CMA072_1_e17a8319-c6ae-4d87-85e8-1ae602e2174b.jpg?v=1782959152"},{"product_id":"microclimate-evo-connect","title":"Microclimate Connect Thermostat","description":"\u003cp\u003eThe Microclimate EVO Connect is a cloud-connected twin-channel thermostat designed for reptile keepers who want full control over their vivarium climate — whether they're in the room or on the other side of the world. With remote monitoring, real-time alerts, and app-based control, it brings a level of oversight that traditional thermostats simply cannot offer.\u003c\/p\u003e\u003ch3\u003eTwo Channels, One Thermostat\u003c\/h3\u003e\u003cp\u003eThe EVO Connect runs one primary thermostat channel alongside a second auxiliary on\/off channel, suitable for controlling lighting or misters. The main channel supports both dimming and pulse temperature control, giving you the flexibility to match the heating method to your setup. The included sensor is highly accurate and IP-rated for reliable, long-term use.\u003c\/p\u003e\u003ch3\u003eApp Control from Anywhere\u003c\/h3\u003e\u003cp\u003eThe free companion app — available on iOS and Android — acts as your central control hub. Add as many EVO Connect units as your collection requires and manage them all from a single interface. The EVO Connect is also compatible with other Connect models within the same app, so you can bring your entire collection under one roof regardless of which supported units you're running. Invite family members, colleagues, or a trusted caretaker with adjustable access levels so the right people always have visibility.\u003c\/p\u003e\u003ch3\u003eLive Data and Temperature History\u003c\/h3\u003e\u003cp\u003eEach thermostat's home screen in the app displays real-time data at a glance: current channel temperatures, active set points, and power output status for each channel. Temperature graphs are stored for up to one year, giving you a meaningful record of your enclosure's climate history. This kind of long-term data is invaluable for spotting trends or troubleshooting issues before they become problems.\u003c\/p\u003e\u003ch3\u003eInstant Alarm Notifications\u003c\/h3\u003e\u003cp\u003eIf a high or low temperature alarm is triggered, the app sends an instant notification directly to your phone. You'll know immediately if something needs attention — whether that's a failed bulb, a sensor issue, or an unexpected temperature swing — rather than discovering the problem hours later.\u003c\/p\u003e\u003ch3\u003eNatural Temperature Ramping\u003c\/h3\u003e\u003cp\u003eThe EVO Connect includes a ramp time function on the thermostat channel that controls how gradually the temperature transitions between set points. Rather than heating rapidly from a cool night temperature to the daytime target, you can spread that change over one or two hours for a far more naturalistic cycle. Combined with multi-setting capability across a full 24-hour period, this allows you to replicate genuinely natural diurnal temperature patterns for your animals.\u003c\/p\u003e\u003ch3\u003eDiscreet and Practical Installation\u003c\/h3\u003e\u003cp\u003eThe control box includes a built-in mounting solution, keeping installation clean and straightforward. There's no requirement to have the unit on display, making it well suited to rack systems, display enclosures, or any setup where aesthetics matter.\u003c\/p\u003e\u003cp\u003eFor keepers who take their husbandry seriously, the Microclimate EVO Connect removes the guesswork and the worry — giving you confidence in your enclosures' conditions at all times, wherever you are.\u003c\/p\u003e","brand":"Peregrine","offers":[{"title":"Default Title","offer_id":54147125805393,"sku":"CMA095","price":104.49,"currency_code":"GBP","in_stock":true}]},{"product_id":"microclimate-evo-connected-2","title":"Microclimate EVO Connected 2","description":"\u003cp\u003eThe Microclimate EVO Connected 2 is a dual-channel, cloud-connected thermostat built for reptile keepers who want precise environmental control over their vivarium — whether they're in the same room or the other side of the world. With one dimming or pulse-selectable channel and one on\/off channel, it gives you meaningful flexibility across two enclosures or two zones within a single setup.\u003c\/p\u003e\u003ch3\u003eA Display Built for Modern Keeping\u003c\/h3\u003e\u003cp\u003eThe EVO Connected 2 features an all-new capacitive touch display with a smooth, all-glass front and gloss black bezel. Response times are sharp and the interface is clean — it sits neatly on any vivarium or rack without looking out of place. A single cable runs from the main control box to the display unit, keeping your setup tidy and cable management straightforward. Mounting solutions are built directly into both the display unit and the main control box.\u003c\/p\u003e\u003ch3\u003eTwo Channels, Full Gradient Monitoring\u003c\/h3\u003e\u003cp\u003eEach channel comes with its own IP-rated temperature sensor, so even when a channel is being used to manage lighting rather than heating, it's still logging temperature data. This means you can place one probe at the basking spot and use the second to monitor the cool end, capturing a full picture of the thermal gradient inside the enclosure. That data is stored and accessible, giving you a reliable record of conditions over time.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDual channel cloud-connected thermostat\u003c\/li\u003e\n\u003cli\u003eChannel 1: Dimming or Pulse-selectable\u003c\/li\u003e\n\u003cli\u003eChannel 2: On\/Off\u003c\/li\u003e\n\u003cli\u003eIP-rated sensor included on every channel\u003c\/li\u003e\n\u003cli\u003eSingle cable from main box to display unit\u003c\/li\u003e\n\u003cli\u003eBuilt-in mounting for both display and control box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eControl From Anywhere via the EVO Connected App\u003c\/h3\u003e\u003cp\u003eThe EVO Connected app, available on iOS and Android, acts as a central hub for your entire collection. Add multiple thermostats to a single account and switch between them from one home screen — you can even mix different EVO Connected models within the same app. Real-time data is displayed per thermostat, including live channel temperatures, current set points, power output status, and temperature graphs with up to one year of historical data. Access is shareable too, so you can grant friends, family, or colleagues varying levels of control over your collection. A web dashboard is also available for those who prefer managing things from a desktop. A Wi-Fi connection to the thermostat is required for cloud features.\u003c\/p\u003e\u003ch3\u003eTiming Modes and Ramp Times\u003c\/h3\u003e\u003cp\u003eThe EVO Connected 2 offers four timing modes to suit everything from simple setups to those requiring a full annual cycle. Ramp time is a standout feature — rather than snapping between temperature set points, the thermostat transitions gradually over a period you define, making temperature shifts more naturalistic for the animal. This is particularly useful at dawn and dusk transitions, where a slow rise or fall across an hour or two more closely mirrors what an animal would experience in the wild.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstant: Single temperature or setting held across 24 hours\u003c\/li\u003e\n\u003cli\u003eDay\/Night: Separate settings for daytime and night-time periods\u003c\/li\u003e\n\u003cli\u003eMulti: Up to 8 different settings across a 24-hour cycle\u003c\/li\u003e\n\u003cli\u003eSeasons: Vary day length and temperature settings across the calendar year\u003c\/li\u003e\n\u003cli\u003eRamp Time: Gradual transitions between set points for more natural temperature changes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eChannel Control and Customisation\u003c\/h3\u003e\u003cp\u003eEach channel can be named and colour-coded within the app for quick identification, and independently configured between Heating, Cooling, or Fixed output modes. Dimming or Pulse control type is selectable per channel. The on-screen menu follows the same familiar layout as the previous EVO generation, so existing users will find their way around immediately. An on-screen temperature history graph is accessible directly from the touchscreen display, alongside the full suite of controls available through the app.\u003c\/p\u003e\u003cp\u003eThe Microclimate EVO Connected 2 gives keepers a serious level of oversight and control without requiring constant manual intervention — ideal for anyone managing a growing collection or simply wanting more confidence in how their animals' environments are being maintained.\u003c\/p\u003e","brand":"Peregrine","offers":[{"title":"Default Title","offer_id":54147126690129,"sku":"CMA100","price":135.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/0403\/8225\/files\/CMA100_1_c0ad1e2e-f582-4bf3-93de-095c706ca101.jpg?v=1782959154"},{"product_id":"microclimate-evo-connected-3","title":"Microclimate EVO Connected 3","description":"\u003cp\u003eThe Microclimate EVO Connected 3 is a three-channel, cloud-connected thermostat built for reptile keepers who want precise environmental control at vivarium level and beyond. With Wi-Fi connectivity, a fully redesigned capacitive touch display, and a dedicated mobile app, it brings together scheduling, data logging, and remote management in a single unit.\u003c\/p\u003e\u003ch3\u003eA New Kind of Display\u003c\/h3\u003e\u003cp\u003eThe EVO Connected 3 features an all-new capacitive touch panel with a smooth, all-glass front and gloss black bezel — fast to respond and clean enough to mount proudly on any setup. A single cable runs between the display and the main control box, keeping wiring tidy and the front panel uncluttered. Mounting solutions are built directly into both the display unit and the control box.\u003c\/p\u003e\u003ch3\u003eThree Channels, Total Flexibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree-channel cloud-connected thermostat\u003c\/li\u003e\n\u003cli\u003eTwo channels selectable between Dimming or Pulse control\u003c\/li\u003e\n\u003cli\u003eOne On\/Off channel\u003c\/li\u003e\n\u003cli\u003eEach channel has its own IP-rated temperature sensor\u003c\/li\u003e\n\u003cli\u003eChannels can be set to Heating, Cooling, or Fixed control\u003c\/li\u003e\n\u003cli\u003eChannels and outputs are colour-coded for quick identification\u003c\/li\u003e\n\u003cli\u003eName each channel individually for easy management\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHaving a dedicated sensor on every channel means you can monitor temperature across the full gradient of an enclosure — for example, logging the cool end while the primary channel controls the basking spot. That data is available whether the channel is managing heat or lighting.\u003c\/p\u003e\u003ch3\u003eRamp Times and Timing Modes\u003c\/h3\u003e\u003cp\u003eRamp time allows temperature transitions to happen gradually rather than abruptly — particularly useful for the shift between night and day set points, where a slow rise over one or two hours is far more natural for the animal than a sudden spike. Four timing modes give you control from the straightforward to the highly detailed:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstant: a single temperature or setting held around the clock\u003c\/li\u003e\n\u003cli\u003eDay and Night: separate settings for daytime and night-time periods\u003c\/li\u003e\n\u003cli\u003eMulti: up to 8 different settings across a 24-hour cycle\u003c\/li\u003e\n\u003cli\u003eSeasons: set different parameters across the year to reflect natural seasonal change\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCloud Connectivity and the EVO Connected App\u003c\/h3\u003e\u003cp\u003eWith the EVO Connected app (available on iOS and Android) and a web dashboard, the EVO Connected 3 can be monitored and adjusted from anywhere with an internet connection. Real-time data shown on the app home screen includes current temperatures, active set points, power output status per channel, and temperature history graphs with up to one year of data stored. Multiple thermostats can be added to a single app, with easy switching between them — and you can mix different EVO Connected models within the same account. Access can be shared with others at varying permission levels, making it practical for collections managed by more than one person.\u003c\/p\u003e\u003ch3\u003eFamiliar Menus, Expanded Capability\u003c\/h3\u003e\u003cp\u003eThe on-screen menu structure will be immediately recognisable to anyone who has used a previous EVO thermostat — the layout has been kept consistent so there is no relearning curve. A temperature history graph remains accessible directly from the touchscreen. The app mirrors this simplicity, with clearly laid out menus that scale from basic day-to-day use through to advanced scheduling and seasonal programming.\u003c\/p\u003e\u003cp\u003eThe EVO Connected 3 is a serious tool for keepers who want genuine precision, remote oversight, and the confidence that every enclosure in their collection is performing exactly as intended.\u003c\/p\u003e","brand":"Peregrine","offers":[{"title":"Default Title","offer_id":54147127181649,"sku":"CMA103","price":157.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/0403\/8225\/files\/CMA103_1_9023930e-ee1c-43ba-8b25-71860b4abefb.jpg?v=1782959155"},{"product_id":"microclimate-evo-connected-pro","title":"Microclimate EVO Connected Pro","description":"\u003cp\u003eThe Microclimate EVO Connected Pro is a three-channel, cloud-connected digital thermostat built for reptile keepers who want precise, flexible environmental control across multiple enclosures — managed from anywhere in the world. With Wi-Fi connectivity, a capacitive touch display, and a dedicated mobile app for iOS and Android, it represents a serious step forward in vivarium climate management.\u003c\/p\u003e\u003ch3\u003eDisplay and Hardware\u003c\/h3\u003e\u003cp\u003eThe EVO Connected Pro uses an all-new capacitive touch glass-fronted display with a gloss black bezel — fast, responsive, and designed to sit cleanly on the front of any vivarium setup. All wiring is housed in a separate main control box, with a single cable running to the display to keep installations tidy. Mounting solutions are built directly into both the display unit and the control box.\u003c\/p\u003e\u003ch3\u003eThree-Channel Configuration\u003c\/h3\u003e\u003cp\u003eThe Pro variant provides three independently controlled channels, each with its own IP-rated temperature sensor:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOne Dimming Pulse channel\u003c\/li\u003e\n\u003cli\u003eOne On\/Off channel\u003c\/li\u003e\n\u003cli\u003eOne On\/Off channel with an integrated humidity sensor\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEach channel's sensor operates independently of its control function — so if a channel is managing lighting, its sensor can still log temperature data from a separate area of the enclosure. This makes full-gradient data logging across the cool end and basking zone straightforward and reliable.\u003c\/p\u003e\u003ch3\u003eApp and Cloud Connectivity\u003c\/h3\u003e\u003cp\u003eThe EVO Connected app (iOS and Android) acts as a central hub for your entire collection. Add multiple thermostats to a single account and switch between them from one home screen — mixing different EVO Connected models is fully supported. Real-time data is displayed per thermostat, including live channel temperatures, current set points, power output status, and temperature history graphs with up to 12 months of logged data. You can also invite other users — family members, co-keepers, or colleagues — with configurable access levels. A web dashboard is also available as an alternative to the app. A Wi-Fi connection to the thermostat is required for all remote features.\u003c\/p\u003e\u003ch3\u003eChannel Control Options\u003c\/h3\u003e\u003cp\u003eEach channel offers a range of control settings to suit different heating and lighting requirements:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eControl type selectable between Dimming or Pulse per channel\u003c\/li\u003e\n\u003cli\u003eMode selectable between Heating, Cooling, or Fixed output\u003c\/li\u003e\n\u003cli\u003eChannels and outputs are colour-coded and individually named for quick identification\u003c\/li\u003e\n\u003cli\u003eTiming modes range from simple constant control through to full multi-period scheduling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRamp Time and Timing Modes\u003c\/h3\u003e\u003cp\u003eRamp time allows temperature transitions to occur gradually rather than immediately — particularly useful for the shift between night and day set points, where a slow rise over one to two hours reflects natural conditions far more accurately than an abrupt change. Three timing modes give keepers full flexibility over the 24-hour cycle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstant: a single temperature or setting maintained around the clock\u003c\/li\u003e\n\u003cli\u003eDay and Night: separate set points for daytime and night-time periods\u003c\/li\u003e\n\u003cli\u003eMulti: up to 8 individual settings across a 24-hour period\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA Seasons mode is also available, enabling year-round environmental variation for species that require it.\u003c\/p\u003e\u003ch3\u003eMenu System and Data History\u003c\/h3\u003e\u003cp\u003eThe on-screen menu follows the same layout as previous EVO generations — keepers already familiar with the range can navigate it without relearning. An on-screen temperature history graph is accessible directly from the touchscreen, providing a quick local view of recent conditions without needing the app.\u003c\/p\u003e\u003cp\u003eThe Microclimate EVO Connected Pro gives experienced keepers and serious collectors the tools to monitor, log, and adjust conditions across their vivarium setup with genuine precision — whether they're in the same room or on the other side of the world.\u003c\/p\u003e","brand":"Peregrine","offers":[{"title":"Default Title","offer_id":54147127771473,"sku":"CMA104","price":214.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/0403\/8225\/files\/CMA104_1_d2d9d21f-e782-4cb4-990c-b64532afc25a.jpg?v=1782959157"},{"product_id":"microclimate-ultra-fast-fuse-pack-5","title":"Microclimate Ultra Fast Fuse Pack (5)","description":"\u003cp\u003eReplacement ultra-fast fuses for Microclimate thermostats — a small but critical component for any keeper who relies on dimming or Prime-series controllers to maintain vivarium temperatures safely.\u003c\/p\u003e\u003ch3\u003eNot the Same as a Standard Fast-Blow Fuse\u003c\/h3\u003e\u003cp\u003eThese ultra-fast fuses are distinct from the standard fast-blow fuses found in some other thermostat brands. They react quickly enough to protect the thermostat's internal circuitry against the large electrical spikes that can occur when an incandescent lamp fails — a failure mode that standard fuses may not respond to in time.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eThese fuses are fitted as standard in all Microclimate Prime thermostats, and in all Microclimate B1 and B1ME dimming thermostats manufactured after January 2014. If you are running any of these units, this is the correct replacement fuse to keep to hand.\u003c\/p\u003e\u003ch3\u003eWhy Keep Spares\u003c\/h3\u003e\u003cp\u003eA blown fuse means a thermostat that stops regulating — which in a vivarium context can be serious. Keeping a pack of five ensures you can restore your setup without delay, and without resorting to an incorrect fuse type that leaves the thermostat unprotected.\u003c\/p\u003e\u003cp\u003eSourcing the right fuse matters. Fitting the wrong type may leave your thermostat vulnerable to spike damage even if it appears to be working normally.\u003c\/p\u003e","brand":"Peregrine","offers":[{"title":"Default Title","offer_id":54147128197457,"sku":"CMA310","price":4.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/0403\/8225\/files\/CMA310_1_d0bde50d-4167-424c-89a4-ae63675aec0f.jpg?v=1782959158"},{"product_id":"pr-pid-dimming-thermostat-300w","title":"ProRep PID Dimming Thermostat 300w","description":"\u003cp\u003eThe ProRep PID Dimming Thermostat is a digitally controlled dimming thermostat built for reptile keepers who need precise, stable heat management in their vivarium or terrarium. Rather than cycling power on and off like a basic thermostat, it uses PID (Proportional-Integral-Derivative) technology to continuously adjust heat output — keeping temperatures steadier and reducing the risk of overheating.\u003c\/p\u003e\u003ch3\u003eWhy PID Control Matters\u003c\/h3\u003e\u003cp\u003eStandard on\/off thermostats react only after the temperature drifts outside the set range, which can cause repeated spikes and dips. PID control anticipates demand and fine-tunes power delivery in real time, resulting in a more consistent thermal environment. For species that depend on reliable basking temperatures or carefully managed ambient heat, this makes a meaningful difference.\u003c\/p\u003e\u003ch3\u003eCompatible Heat Sources\u003c\/h3\u003e\u003cp\u003eThe ProRep PID Dimming Thermostat works with a broad range of heating equipment, giving keepers flexibility across different vivarium setups.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncandescent basking lamps\u003c\/li\u003e\n\u003cli\u003eInfrared heat lamps\u003c\/li\u003e\n\u003cli\u003eCeramic heat emitters\u003c\/li\u003e\n\u003cli\u003eHeat mats\u003c\/li\u003e\n\u003cli\u003eMaximum load: 300W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDisplay and Monitoring\u003c\/h3\u003e\u003cp\u003eA clear digital display lets you read the current temperature at a glance. If conditions shift unexpectedly, a flashing warning alert draws your attention to abnormal temperature changes — a useful safeguard when you can't be watching the enclosure continuously.\u003c\/p\u003e\u003ch3\u003eSpecifications and Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControl technology: Advanced PID dimming\u003c\/li\u003e\n\u003cli\u003eTemperature control range: 5°C to 65°C\u003c\/li\u003e\n\u003cli\u003eDigital display screen\u003c\/li\u003e\n\u003cli\u003eWarning flash for unusual temperature change\u003c\/li\u003e\n\u003cli\u003ePower-off memory function — retains settings after a power interruption\u003c\/li\u003e\n\u003cli\u003eMaximum load: 300W\u003c\/li\u003e\n\u003cli\u003eFor indoor use only\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe probe must be positioned securely inside the enclosure, with the thermostat unit kept outside. Whether you're running a tropical setup or a species that demands a precise basking spot, the ProRep PID Dimming Thermostat gives you the control to maintain it reliably.\u003c\/p\u003e","brand":"Peregrine","offers":[{"title":"Default Title","offer_id":54147153756497,"sku":"CPC001","price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/0403\/8225\/files\/CPC001_1_f6140fc1-f392-43a0-905f-3600b14f9fcb.jpg?v=1782959220"},{"product_id":"rz-pid-dimming-thermostat-tc02","title":"ReptiZoo PID Mini Dimming Thermostat","description":"\u003cp\u003eThe ReptiZoo PID Dimming Thermostat TC02 is a precision temperature controller built specifically for use with light-emitting heat sources in reptile vivariums and terrariums. Its PID heating mode actively stabilises output rather than simply switching on and off, which reduces thermal stress on bulbs and extends their working life — a meaningful advantage for keepers running high-output lighting setups.\u003c\/p\u003e\u003ch3\u003eAccurate, Stable Temperature Control\u003c\/h3\u003e\u003cp\u003eAt the heart of the TC02 is a highly sensitive probe sensor that reads ambient temperatures in real time, continuously adjusting output to hold conditions steady. The thermostat maintains control across a range of 20°C to 50°C (68°F to 122°F), covering the thermal requirements of the vast majority of reptile and exotic species kept in the UK.\u003c\/p\u003e\u003ch3\u003eStraightforward to Set Up and Use\u003c\/h3\u003e\u003cp\u003eSetup is direct: position the probe, dial in your target temperature, and connect your heating device. The LED digital display shows both the current ambient reading and your chosen settings at a glance. Switching between Celsius and Fahrenheit is supported for keepers who work in either scale.\u003c\/p\u003e\u003ch3\u003eWhy Temperature Stability Matters\u003c\/h3\u003e\u003cp\u003eReptiles are ectotherms — they depend entirely on their environment to regulate core body temperature and drive everything from digestion to immune function. The TC02 removes the fluctuation that simpler on\/off stats introduce, maintaining the consistent thermal gradient your animals need to thrive.\u003c\/p\u003e\u003ch3\u003eCompatible Heating Devices\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeat bulbs (primary recommended application)\u003c\/li\u003e\n\u003cli\u003eHeating mats\u003c\/li\u003e\n\u003cli\u003eHeat cables\u003c\/li\u003e\n\u003cli\u003eMaximum output load: 300W\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe ReptiZoo PID Dimming Thermostat TC02 gives reptile keepers a reliable, low-fuss controller that genuinely earns its place in a well-managed vivarium setup — whether you are running a single enclosure or managing a dedicated breeding room.\u003c\/p\u003e","brand":"Peregrine","offers":[{"title":"Default Title","offer_id":54147188851025,"sku":"CQT102","price":22.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/0403\/8225\/files\/CQT102_1_9d542d14-7060-41bb-9c55-60442b6a9a4f.jpg?v=1782959261"},{"product_id":"rz-dual-plug-dimming-stat-timer-300w-tc04","title":"ReptiZoo Dual Plug Dimming Thermostat \u0026 Timer 300w","description":"\u003cp\u003eThe ReptiZoo TC04 combines a dimming thermostat and an independent timer into a single unit, giving reptile keepers precise control over both heating and scheduled vivarium equipment from one device. Designed for keepers who want a tidy, capable setup without running multiple controllers.\u003c\/p\u003e\u003ch3\u003eTwo Independent Sockets, Two Distinct Jobs\u003c\/h3\u003e\u003cp\u003eThe TC04 features two separate plugs — one dedicated to dimming thermostat control, and one operating purely as a programmable timer. Each socket works independently, so your heating and your scheduled equipment run on their own terms without interfering with each other.\u003c\/p\u003e\u003ch3\u003eDimming Thermostat Socket\u003c\/h3\u003e\u003cp\u003eThe thermostat socket uses dimming output, making it suitable for ceramic heat emitters, basking bulbs, heat mats, and heat cables. Dimming control maintains temperature by gradually adjusting power output rather than switching on and off, which reduces stress on bulbs and provides more stable ambient temperatures in the vivarium.\u003c\/p\u003e\u003ch3\u003eTimer Socket\u003c\/h3\u003e\u003cp\u003eThe second socket runs on a timer function, independent of temperature. This makes it well suited to equipment that needs scheduled operation — such as misters, foggers, UVB lighting, or secondary nighttime heating. Set it to run on a cycle that matches your species' requirements without tying it to thermostat behaviour.\u003c\/p\u003e\u003ch3\u003ePower Rating\u003c\/h3\u003e\u003cp\u003eThe TC04 is rated to 300W, which covers the majority of standard vivarium heating setups. Check the wattage of your connected equipment before use to ensure it falls within this limit.\u003c\/p\u003e\u003cp\u003eA straightforward, dual-function controller that removes the need for a separate thermostat and timer — keeping your vivarium wiring manageable and your environmental control consistent.\u003c\/p\u003e","brand":"Peregrine","offers":[{"title":"Default Title","offer_id":54147188982097,"sku":"CQT104","price":35.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/0403\/8225\/files\/CQT104_1_4fbd8a91-5d2e-4272-9ca4-604b480a18cb.jpg?v=1782959262"},{"product_id":"rs-dimming-thermostat-400w-122059","title":"Reptile Systems Dimming Thermostat 400w","description":"\u003cp\u003eThe Reptile Systems Dimming Thermostat 400w is an analogue dimming thermostat designed for keepers who need stable, consistent heat control across vivarium, terrarium, and aquatic setups. Rather than cycling power on and off like a basic on\/off thermostat, it modulates electrical flow to the heating element — keeping temperatures steady rather than oscillating around a set point.\u003c\/p\u003e\u003ch3\u003eHow Dimming Works\u003c\/h3\u003e\u003cp\u003eOn\/off thermostats cut power completely when the target temperature is reached, then restore it fully when temps drop — a cycle that causes fluctuation. A dimming thermostat reduces power incrementally as the set temperature is approached, holding output at whatever level is needed to maintain that point. The result is a more stable thermal environment, which is particularly important for species sensitive to temperature swings.\u003c\/p\u003e\u003ch3\u003eCompatible Environments\u003c\/h3\u003e\u003cp\u003eThis thermostat is rated for use in both reptile enclosures and freshwater or saltwater aquariums, making it a versatile choice across the vivarium and aquatics hobby. It is well suited to larger aquariums, indoor ponds, and terrestrial or tropical terrarium builds where reliable background heat is required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaximum load: 400w\u003c\/li\u003e\n\u003cli\u003eSupply: 240v \/ 50hz\u003c\/li\u003e\u0026lt;\u003cli\u003eSuitable for reptile vivariums and fresh or saltwater fish tanks\u003c\/li\u003e\n\u003cli\u003e2-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor keepers running mid-to-high wattage heating in a reptile or aquatic setup, the Reptile Systems Dimming Thermostat 400w delivers dependable analogue control backed by a manufacturer warranty — straightforward to set up, and built to run consistently over the long term.\u003c\/p\u003e","brand":"Peregrine","offers":[{"title":"Default Title","offer_id":54147189014865,"sku":"CRT010","price":37.74,"currency_code":"GBP","in_stock":true}]},{"product_id":"reptizoo-deluxe-thermostat-heat-mat","title":"ReptiZoo Deluxe Thermostat Heat Mat","description":"\u003cp\u003eThe ReptiZoo Deluxe Thermostat Heat Mat is a self-contained heating solution that combines a carbon film heat mat with a built-in digital thermostat — no separate controller required. Available in four sizes to suit enclosures ranging from small terrestrial setups to larger terrariums, it gives reptile keepers precise, reliable belly heat without the clutter of additional hardware.\u003c\/p\u003e\u003ch3\u003eBuilt-in Temperature Control\u003c\/h3\u003e\u003cp\u003eA smart chip thermostat is integrated directly into the unit, allowing you to dial in temperatures between 20°C and 50°C with digital accuracy. This removes the guesswork and gives you consistent, repeatable results — particularly important for species with specific thermal requirements.\u003c\/p\u003e\u003ch3\u003eCarbon Film Heating Element\u003c\/h3\u003e\u003cp\u003eThe heating surface uses carbon film technology, which distributes warmth quickly and evenly across the mat. There are no cold spots or hot zones — just a stable, uniform heat gradient that supports natural thermoregulation behaviour in your animals.\u003c\/p\u003e\u003ch3\u003eDurable, Flexible Construction\u003c\/h3\u003e\u003cp\u003eThe mat is coated in PVC for robust insulation and long-term resilience. It can be rolled without deforming, making storage and repositioning straightforward. The construction is built to handle regular use without degradation.\u003c\/p\u003e\u003ch3\u003eVersatile Placement Options\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdhesive backing allows secure positioning beneath or on the side walls of a terrarium\u003c\/li\u003e\n\u003cli\u003eSuitable for use with glass, plastic, and wood-based enclosures\u003c\/li\u003e\n\u003cli\u003eFour size options available to match different vivarium footprints and species requirements\u003c\/li\u003e\n\u003cli\u003eUnderfloor or side-wall mounting gives flexibility depending on your heating strategy\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eChoosing the right size matters — select your variant based on your enclosure dimensions and the wattage needed to maintain temperature in your specific setup. Each option in the range shares the same build quality and thermostat functionality, scaled appropriately for the enclosure it is designed to serve.\u003c\/p\u003e","brand":"Peregrine","offers":[{"title":"100 x 178mm 6w","offer_id":54176509493585,"sku":"CQT006","price":38.91,"currency_code":"GBP","in_stock":false},{"title":"150 x 200mm 11w","offer_id":54176509526353,"sku":"CQT011","price":40.66,"currency_code":"GBP","in_stock":false},{"title":"200 x 300mm 23w","offer_id":54176509559121,"sku":"CQT023","price":43.99,"currency_code":"GBP","in_stock":false},{"title":"200 x 450mm 36w","offer_id":54176509591889,"sku":"CQT036","price":46.16,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/0403\/8225\/files\/CQT006_1.jpg?v=1782959259"}],"url":"https:\/\/viperia.co.uk\/collections\/reptile-thermostats.oembed","provider":"Viperia UK","version":"1.0","type":"link"}